Hi,
the module WS-SVC-FWM-1 its comming up at the 6509-E chassis.
i did try set up the CF to 4 but the module only shows power down, also i have tried change for cf:5 but still not working.
i have setup the boot devivce, have tried reset the module and nothing worked.
boot device module 3 cf:4
hw-module module 3 cf:1
This module its a brand new device.
The FWSM is using software 4.0(4)
Router#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
3 6 Firewall Module WS-SVC-FWM-1 SAL1440VEBF
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1441W7BA
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
3 f866.f29a.3930 to f866.f29a.3937 4.5 7.2(1) 8.5(0.46)RFW Other
5 0022.559e.3d34 to 0022.559e.3d37 5.12 8.5(4) 12.2(18)SXF1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SAL1441W6UJ 2.6 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL1441W58B 5.1 Ok
Mod Online Diag Status
---- -------------------
3 Unknown
5 Pass
Router#
Please let me know what i am missing.
Thank you.
