04-05-2011 03:37 AM - edited 03-11-2019 01:16 PM
Hi,
we have a cat6509 with FWSM. We pass to the FWSM several VLANs. All
L3 is assigned to the FWs.
In the Cat6500 log we have received this message
%SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
when we configure 2 vlans in a trunk to an ESX server (these 2 VLANs are already
assigned to the FWSM).
Idea is to share an interface to a ESX server with several VLANs, some of them
are assigned also to FWSM.
Is this a problem?
Configuration:
firewall vlan-group 1 610-613,620,621,794-799,802,804
interface GigabitEthernet1/6
description ESX
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,200,201,300,399,802,804
switchport mode trunk
Thanks
Solved! Go to Solution.
04-05-2011 03:49 AM
It's just a warning message to tell you that the same VLANs was also assigned to the firewall.
Here is more information on the error message:
https://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K93524594
Hope that helps.
04-05-2011 03:49 AM
It's just a warning message to tell you that the same VLANs was also assigned to the firewall.
Here is more information on the error message:
https://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K93524594
Hope that helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide