09-28-2022 05:14 AM
We have an FPR 1120 that we're configuring and we have a Wireless LAN controller on the inside interface that WiFi APs will need to connect to from the other FPR interfaces; i.e. 1/3, 1/4, etc. On our existing ASA 5506-X I think we used a command that allowed traffic between interfaces, it was something about the same security level ?? Is there a similar command on the FPR to allow traffic between interfaces ?
09-28-2022 05:18 AM
@john.garza you are referring to the ASA command "same-security-traffic permit inter-interface" this is enabled as default on the FTD, you just need to permit the traffic in the Access Control Policy.
09-28-2022 05:18 AM - edited 09-28-2022 05:21 AM
are you running the ASA code on FTD unit give command 'same-security-traffic permit inter-interface'
Unlike with classic ASA software, Firepower Threat Defense by default allows same-security traffic both inter- and intra-interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide