11-02-2012 10:42 AM - edited 03-11-2019 05:18 PM
Hey erveyone,
I have an ASA Services Module in a Catalyst Switch with the 8.5(1) version installed on which I am not able to create FQDN Network object :
ASA-SM(config)# object network www.cisco.com
ASA-SM(config-network-object)# ?
description Specify description text
help Help for network object configuration commands
host Enter this keyword to specify a single host object
nat Enable NAT on a singleton object
no Remove an object or description from object
range Enter this keyword to specify a range
subnet Enter this keyword to specify a subnet
I also have a ASA 5585 with a 8.4(2) IOS version installed on which I am able to create this kind of objects:
ASA-5582(config)# object network www.cisco.com
ASA-5585(config-network-object)# ?
description Specify description text
fqdn Enter this keyword to specify an FQDN
help Help for network object configuration commands
host Enter this keyword to specify a single host object
nat Enable NAT on a singleton object
no Remove an object or description from object
range Enter this keyword to specify a range
subnet Enter this keyword to specify a subnet
Is this kind of object not supported by this IOS 8.5(1) version ? Is it going to be available on the next release ?
Thank you very much !
Solved! Go to Solution.
11-02-2012 11:06 AM
Hello,
Actually the FQDN was add it on 8.4.2 as you can see here:
https://supportforums.cisco.com/docs/DOC-17014
We have seen some cases regarding this particular request, so it will definetly cover that on the future
Hope I coudl help.
Remembe to rate all of the helpful posts ( if you do not know how to rate a post just go to each reply and on the bottom mark a star ( from 1 to 5) 1 being bad 5 being a great answer)
11-02-2012 10:50 AM
Hello Francois,
Check the following link
http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn85.html#wp71365
Features added in 8.4(2) are not included in 8.5(1) unless they are explicitly listed in this table.
So the answer is no, it's no supported
Regards,
Julio
11-02-2012 11:00 AM
Hey Julio,
Thank you for your answer. It is too bad. Do you know if Cisco is going to add this feature in the next 8.5(x) release ?
I have seen that the fqdn network object were introduced in the 8.3(1) version : http://www.cisco.com/en/US/docs/security/asa/asa83/release/notes/asarn83.html#wp460665 (Table 7 - New Features for ASA Version 8.3(1))
Is is not supposed to be there in the 8.5(1) version ?
Thank you !
11-02-2012 11:06 AM
Hello,
Actually the FQDN was add it on 8.4.2 as you can see here:
https://supportforums.cisco.com/docs/DOC-17014
We have seen some cases regarding this particular request, so it will definetly cover that on the future
Hope I coudl help.
Remembe to rate all of the helpful posts ( if you do not know how to rate a post just go to each reply and on the bottom mark a star ( from 1 to 5) 1 being bad 5 being a great answer)
11-02-2012 11:17 AM
Thank you Julio,
I will definitely rate your answers !
11-02-2012 11:26 AM
Hello Francois,
My pleasure, if you do not need something else please mark the question as answered,
Regards,
Julio
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: