FTD 1140's SNMP memory & CPU monitoring

[andrew.butterworth]

We have two HA pairs of FPR1140's running FTD code and managed by a virtual FMC.  They are all running 6.6.5 code.

There are some FTD platform SNMP settings pushed to all the FTDs as we monitor these with another monitoring platform.

We are monitoring the FTDs via the management interfaces.

Our monitoring platform has huge gaps where the FTDs don't respond to polls for memory & CPU.  These gaps can be whole days and are identical for the CPU & memory data sources on the same FTD, however are different between devices.  However interfaces that are monitored show valid data for these periods.

I have checked its not failover and these have been up as a pair since 25th October and no failovers have occurred since then.

Is this a bug?

[nspasov]

Hi Andrew. It is hard to tell based on the information provided. A couple of things you can try:

1. Raise a request with Cisco TAC

2. Download the complete set of FXOS MIBs from the link below and import them in your NMS solution:

https://software.cisco.com/download/home/286322202/type/286306337/release/6.6.5

I hope this helps!

Thank you for rating helpful posts!

[andrew.butterworth]

I am wondering whether we are hitting this bug: CSCvu80143