FTD 1150 LDAPs not working on Remote Access VPN

[the_flyps]

Hi,

I already have configure the ldap and it is working on VPN perfectly, but when I configure LDAPs i'm getting login error with the following error on the logs:

"AAA unable to complete the request error reason memory error"

I have done the following:

• Test directory configuration (test connection succeeded)
• Test the Realm Configuration (AD Join test succeed)
• CA enrollment is fine
• Users download is working too

If i rollback to ldap without SSL it starts working fine

[the_flyps · Accepted solution]

As https://bst.cisco.com/quickview/bug/CSCwd25602 it was a misleading message. it was a DNS problem on the FTD. on the FMC was good but the FTD could not reach the domain controller by the name.

This was the error i identify:

New request Session, context 0x000015487ec50de8, reqType = Authentication
%FTD-sys-7-711001: [3539578] Fiber started
%FTD-sys-7-711001: [3539578] Failed to convert ip address 0.0.0.0
%FTD-sys-7-711001: [3539578] Fiber exit Tx=0 bytes Rx=0 bytes, status=-2
%FTD-sys-7-711001: [3539578] Session End

Thank you Guys