05-08-2020 09:08 AM
I need a few clarifications
a) I need to provide two Cisco Firepower 2100 Series in a HA par to customer and customer already has Firesight at his data center. I need to demonstrate this two firewalls first at my place without Firesight. Is it possible to setup these firewalls without Firesight? Can I define HA pair, access rules. Can I use Firepower Device Manager?
b) By default do we get ASA 5516-X with FirePOWER Services with FTD image? I hope I can setup these firewalls with Firepower Device Manager without Firesight.
c) ASA 5525-x, 5545-x etc are shipped with ASA software and SSD hard disk for IPS. Is it possible to get these firewalls with FTD and can we manage them using Firepower Device Manager without Firesight? In this case are we using SSD hard disk?
Solved! Go to Solution.
05-08-2020 11:08 PM
You might want to be aware of the proper name if you are presenting your work to a customer. The Firesight Management Center name was discontinued as of 6.0 several years ago. It's now Firepower Management Center.
05-08-2020 09:28 AM
Hi,
Yes you can manage an FTD HA pair using FDM, guide here.
If your 2100 came installed with ASA software, you can re-image to FTD, guide here.
You can order the Firepower hardware with ASA or FTD software, so you can decide before purchasing. This can be managed local using FDM and if required using CDO (cloud managed).
HTH
05-08-2020 01:02 PM
Just to re-confirm Cisco Firepower 2100 Series can be managed by FDM in a HA pair, so it's not mandatory to use Firesight Management Center.
05-08-2020 01:10 PM
05-08-2020 11:08 PM
You might want to be aware of the proper name if you are presenting your work to a customer. The Firesight Management Center name was discontinued as of 6.0 several years ago. It's now Firepower Management Center.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide