FTD change ssh timeout?

[r.walthall]

Hi all,  FTD keeps logging me out (after about 5 min i think).  would like to set

ssh timeout 60

is there a way to do that?

(we're using FMC to manage FTD)

Thanks in advance

[Mohammed al Baqari]

Hi,

You can manage this from FMC > Device > Platform Settings > Timeout

***** please remember to rate useful posts

[r.walthall]

I've looked there so many times. sadly, ssh isn't listed on that page

[thegornthisisarchaic]

Hey r.walthall,

I'm in the same boat.  And it's not listed on there for me either.  

Did you ever find out where that is?

Thank you!

[Marvin Rhoads]

Configure Global Timeouts

You can set the global idle timeout durations for the connection and translation slots of various protocols. If the slot has not been used for the idle time specified, the resource is returned to the free pool.

You can also set a time out for console sessions with the device.

Procedure

---

Step 1	Choose Devices > Platform Settings and create or edit the threat defense policy.
Step 2	Select Timeouts.
Step 3	Configure the timeouts you want to change. For any given setting, select Custom to define your own value, Default to return to the system default value. In most cases, the maximum timeout is 1193 hours. You can disable some timeouts by selecting Disable. Console Timeout—The idle time until a connection to the console is closed, range is 0 or 5 to 1440 minutes. The default is 0, which means the session does not time out. If you change the value, existing console sessions use the old timeout value. The new value applies to new connections only.

[Daniel Jacob Gutierrez]

Hi @Marvin Rhoads 

does this console timeout applies to the ssh session to the ftd?

Regards,

Daniel Gutierrez

[Marvin Rhoads]

@Daniel Jacob Gutierrez it only applies to console serial port - not ssh. I don't believe we can set the ssh timeout currently.

[Daniel Jacob Gutierrez]

@Marvin Rhoads  thanks!