04-11-2024 11:02 AM
Hi All,
I'm planning to add a new FTD cluster (FP 3140) and manage it through the current FMC which is used to manage 4145 cluster. Can I create the cluster in the FXOS (through Chassis Manager) ? Or it should exclusively be added through FMC?
Thank you
04-11-2024 11:05 AM
Hi @hadeelOth81 you configure the clustering of the FTDs from the FMC.
04-11-2024 11:08 AM
@Rob Ingram Thanks Rob for your reply. So it means no workaround to configure it from the Chassis manager!
Thank you,
04-11-2024 11:11 AM
@hadeelOth81 no you don't configure it from the chassis manager, clustering and other such functionality is configured from the FMC.
04-11-2024 11:10 AM
You can use I think FDM check link
MHM
04-11-2024 11:13 AM
@MHM Cisco World wrote:
You can use I think FDM check link
MHM
@MHM Cisco World clustering is not High Availability and FDM does not support clustering, only HA.
04-11-2024 11:16 AM
If that is the case can a we migrate a cluster from one FMC to another one?
Thank you all!
04-11-2024 11:18 AM
@hadeelOth81 register the FTD's on the other FMC and create the cluster.
04-11-2024 11:21 AM
Why yoh don't run two cluster (not ha) in one fmc?
MHM
04-12-2024 07:00 AM
As @Rob Ingram correctly noted in his first reply to this thread, 3100 series clusters are managed differently from 4100 and 9300 series in that you onboard the chassis into FMC and then add FTD instances (and clustering) as desired. The older series used the separate chassis manager to create instances which were then in turn managed with FMC.
04-12-2024 07:09 AM
Much appreciated, Marvin.
04-12-2024 07:15 AM
Friend you need to run cluster or HA ?
MHM
04-12-2024 07:17 AM
I need to run a cluster.
Thank you,
Hadeel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide