07-31-2023 01:48 AM
I had configured this ACL through Flex Config
access-list CPLANE extended deny ip host 185.11.61.172 any
access-list CPLANE extended permit ip any any
access-group CPLANE in interface outside control-plane
I want to add new IP to block. But when I did it, I can not deploy may config. I have tried remove this Flexconfig from configuration, but I still not able to deploy. How can I fix this?
Solved! Go to Solution.
07-31-2023 02:33 AM
@tpospisil To manually remove the configuration, you create new FlexConfig objects to clear or negate the configuration commands.
FYI, a control-plane ACL has an implict "permit" at the end, unlike a normal ACL.
07-31-2023 02:33 AM
@tpospisil To manually remove the configuration, you create new FlexConfig objects to clear or negate the configuration commands.
FYI, a control-plane ACL has an implict "permit" at the end, unlike a normal ACL.
07-31-2023 02:45 AM
What is FPR platform you have ?
07-31-2023 02:47 AM
2120 and FMC, all in version 7.0.5
But my problem is now solved. Thanks to Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide