11-14-2017 03:02 PM - edited 02-21-2020 06:45 AM
I have 2 x FTD2110 managed by an FMCv, all v6.2.2. I'm trying to create an HA pair using an EtherChannel rather than a single physical link. However, only the physical interfaces are appearing in the dialog box to create the HA pair. The documentation states that "You can use any unused data interface (physical, redundant, or EtherChannel) as the failover link"though. This is really simple to do with ASAs... what am I missing when it comes to FTDs? Thanks!
Solved! Go to Solution.
11-16-2017 05:50 AM
11-15-2017 03:43 AM
Have you assigned an IP address to the Etherchannel first?
I don't have one to check but I believe some other posters reported success after having done that.
11-15-2017 04:16 AM
Just tried it - no difference. Thanks for the suggestion though.
11-16-2017 05:50 AM
03-22-2024 12:19 AM
Thank you noisey_uk. Works for me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide