03-21-2018 08:46 AM - edited 02-21-2020 07:32 AM
Hi,
I'm using FTD 2110 via FMC 6.2.2.2
Is there a way to see real time logs via CLI or FMC for troubelshooting ?
I know there is packet capture and packet tracer but I need to see what alerts/warnings , my FTD is generating.
regards,
Solved! Go to Solution.
03-21-2018 08:53 AM
Hi Sam,
For alerts and warnings there is a health module on FMC which would give alert as and when detected on GUI.
If you really want to see the CLI side, it has to be specific to what you are looking for.
All of general logs can be found under /var/log/messages.
cd /var/log
tail -f messages
This would dump almost everything including internal system level messages most which can be ignored.
Hope that helps,
Yogesh
03-21-2018 08:53 AM
Hi Sam,
For alerts and warnings there is a health module on FMC which would give alert as and when detected on GUI.
If you really want to see the CLI side, it has to be specific to what you are looking for.
All of general logs can be found under /var/log/messages.
cd /var/log
tail -f messages
This would dump almost everything including internal system level messages most which can be ignored.
Hope that helps,
Yogesh
03-21-2018 09:04 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide