FTDv default password

[Knassi]

Please what is the FTDv default username and password in AWS?

I did not set any username or password while lunching.

Thank you for the help.

[Knassi]

So i used the instance ID and it worked.

Thanks

[MHM Cisco World]

this second post for same issue, so both issue solved by instance ID?

[Knassi]

Yes. The FMCv and the FTDv both use the instance ID as default password. That is if the password was not set during the launching process.

[MHM Cisco World]

With the exception of FTDvs that use Firepower 7.0+ on Amazon Web Services (AWS), a new FTDv deployment has no configurations, and the admin password is Admin123. For FTDvs that use Firepower 7.0+ on AWS, a new deployment has no configuration and there is no default password; you supply an admin password at deployment time.

[Knassi]

Enter your username and password defined for the device, then click Login.

You can use the admin username, which is a pre-defined user. The default admin password is Admin123. On AWS, the default admin password is the AWS Instance ID, unless you define a default password with user data (Advanced Details > User Data) during the initial deployment.

Your session will expire after 30 minutes of inactivity, and you will be prompted to log in again. You can log out by selecting Log Out from the user icon drop-down menu in the upper right of the page.

https://www.cisco.com/c/en/us/td/docs/security/firepower/720/fdm/fptd-fdm-config-guide-720/fptd-fdm-get-started.html

[MHM Cisco World]

it clear NOW 
thanks a lot