cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
222
Views
0
Helpful
0
Replies

FTDv in Azure Not Booting Correctly

br-ext
Level 1
Level 1

Hi,

After restarting a FTDv in Azure the device constantly cycles through the initial setup script, see output below.

Has anyone encountered this/able to offer any advice on the fix?

 

 

 

 

 

 

 

 

 

 

FTDv-FW login: admin
Password:
Last login: Wed Feb 14 20:34:32 UTC 2024 on ttyS0

Copyright 2004-2023, Cisco and/or its affiliates. All rights reserved.
Cisco is a registered trademark of Cisco Systems, Inc.
All other trademarks are property of their respective owners.

Cisco Firepower Extensible Operating System (FX-OS) v2.12.0 (build 519)
Cisco Firepower Threat Defense for Azure v7.2.5 (build 208)


System initialization in progress. Please stand by.
For system security, you must change the admin password before configuring this device.

Password must meet the following criteria:
- At least 8 characters
- At least 1 lower case letter
- At least 1 upper case letter
- At least 1 digit
- At least 1 special character such as @#*-_+!
- No more than 2 sequentially repeated characters
- Not based on a simple character sequence or a string in password cracking dictionary

Enter new password:
Confirm new password:

Password successfully changed for the admin user.

You must configure the network to continue.
Configure at least one of IPv4 or IPv6 unless managing via data interfaces.
Do you want to configure IPv4? (y/n) [y]:
Do you want to configure IPv6? (y/n) [n]:
Configure IPv4 via DHCP or manually? (dhcp/manual) [manual]:
Enter an IPv4 address for the management interface [10.1.1.10]:
Enter an IPv4 netmask for the management interface [255.255.255.240]:
Enter the IPv4 default gateway for the management interface [10.1.1.1]:
Enter a fully qualified hostname for this system [FTDv-FW]:
Enter a comma-separated list of DNS servers or 'none' [10.2.2.2]:
Enter a comma-separated list of search domains or 'none' [reddog.microsoft.com]: none
If your networking information has changed, you will need to reconnect.
Unable To Configure Network: Unable to save network files:Unable to move /tmp/8mkysNYJnX to /ngfw/etc/sysconfig/network-devices/ifcfg-static-routes:'/bin/cp /ngfw/tmp/8mkysNYJnX /ngfw/etc/sysconfig/network-devices/ifcfg-static-routes' failed at /usr/local/sf/lib/perl/5.24.4/SF/NetworkConf.pm line 134.

Printing stack trace:
called from /ngfw/usr/lib64/perl/site_perl/5.24.4/Error.pm (150)
called from /ngfw/usr/lib64/perl/site_perl/5.24.4/Error.pm (396)
called from /usr/local/sf/lib/perl/5.24.4/SF/NetworkConf.pm (135)
called from /usr/local/sf/bin/cli_firstboot (912)
called from /usr/local/sf/bin/cli_firstboot (1200)

*************************************************************************************************
**************************************** ACME GROUP *********************************************
** **
** Unauthorised access or use of this equipment is prohibited and constitutes an offence under **
** the Computer Misuse Act 1990. If you are not authorised to use this system, terminate this **
** session now. All system activity is monitored and recorded by system personnel. Use of this **
** system evidences an express consent to such monitoring and agreement that if such monitoring**
** reveals evidence of possible abuse or criminal activity, system personnel may provide the **
** results of monitoring to the appropriate officials. **
** **
*************************************************************************************************
*************************************************************************************************

FTDv-FW login: admin
Password:
Last login: Wed Feb 14 20:37:22 UTC 2024 on ttyS0

Copyright 2004-2023, Cisco and/or its affiliates. All rights reserved.
Cisco is a registered trademark of Cisco Systems, Inc.
All other trademarks are property of their respective owners.

Cisco Firepower Extensible Operating System (FX-OS) v2.12.0 (build 519)
Cisco Firepower Threat Defense for Azure v7.2.5 (build 208)


System initialization in progress. Please stand by.
For system security, you must change the admin password before configuring this device.

Password must meet the following criteria:
- At least 8 characters
- At least 1 lower case letter
- At least 1 upper case letter
- At least 1 digit
- At least 1 special character such as @#*-_+!
- No more than 2 sequentially repeated characters
- Not based on a simple character sequence or a string in password cracking dictionary

Enter new password:

0 Replies 0
Review Cisco Networking for a $25 gift card