FTDv Interface Not Pinging

[CiscoIPMAN]

I currently have a FTDv managed by FMC (v6.4). I have configured an inside interface through the FMC that is connecting to an access switch with an IP address but did not add a security zone. Problem is I cannot ping that interface from the switch or any other device. I can ping the FMC ok but that is on a different network. The ARP entry on the switch shows incomplete from the Inside interface and no ARP entry on the FTD. I have added a static ARP entry on both the FTDv and the switch but no luck.

Is there something that I am missing here or maybe related to the FTD being virtual?

Thanks

[Rob Ingram]

Hi,

When you configured the interface in the FMC did you enable the interface and deploy the policy?

Can you ping the switch from the FTD?

How did you configure the virtual nic?

[CiscoIPMAN]

Rob,

Yes I have enabled and deployed the configuration. I can not ping the switch from the FTD but I can ping the FMC from the m0/0 interface.

I am using a KVM image but no issue using the management interface to the FMC.

Thanks

[Marvin Rhoads]

Have you configured the interfaces in KVM as promiscuous mode and disabled port security?

https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/kvm/ftdv-kvm-gsg/ftdv-kvm-intro.html#Cisco_Reference.dita_07304b2d-372d-4aca-99ad-c2eb3afa79e0