07-22-2015 11:34 AM - edited 03-11-2019 11:19 PM
Hi, I have a customer who is running FWSM version 2.3(5).
I can see the show running-config all and I see a lot of nat exceptions (nat 0) but I don't find the nat-control command.
I have two questions:
01) Someone knows if in the FWSM version 2.3(5) the nat-control is always enabled ?
02) Where I can find a link to download the FWSM configuration guide for the version 2.3.x ?
Thanks in Advanced,
My Best Regards,
Andre Lomonaco
Solved! Go to Solution.
07-23-2015 05:08 AM
Hi,
To my understanding the command "nat-control" was introduced in the software level 3.1(1) on the FWSM so your device would not know that command.
I am not sure what the operation before that is since I have not used such an old software either on FWSM side or the PIX side. The default setting when the command was introduced was "no nat-control".
I can not find such an old Configuration Guide. Oldest is 3.1
http://www.cisco.com/c/en/us/support/interfaces-modules/catalyst-6500-series-firewall-services-module/model.html#ConfigurationGuides
I am not sure what kind of differences there are. I guess there might be some as were talking about a pretty old software level.
- Jouni
07-23-2015 05:08 AM
Hi,
To my understanding the command "nat-control" was introduced in the software level 3.1(1) on the FWSM so your device would not know that command.
I am not sure what the operation before that is since I have not used such an old software either on FWSM side or the PIX side. The default setting when the command was introduced was "no nat-control".
I can not find such an old Configuration Guide. Oldest is 3.1
http://www.cisco.com/c/en/us/support/interfaces-modules/catalyst-6500-series-firewall-services-module/model.html#ConfigurationGuides
I am not sure what kind of differences there are. I guess there might be some as were talking about a pretty old software level.
- Jouni
07-23-2015 05:55 AM
Hi Jouni, thanks a lot for your reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide