07-01-2013 01:13 PM - edited 03-11-2019 07:05 PM
Dears ,
I wannt to recover the enable pasword of the FWSM
is this the correct procedure :
Router# hw-module module slot-number reset cf:1
Router# session slot slot-number processor 1
Log into Root.
root@localhost# clear passwd cf:partition_number
root@localhost# exit
and if this true , it will reboot FWSM from maintenance partition which is cf:1 , is this will affect the traffic ? I think it will
07-04-2013 10:24 AM
Hi Hamzeh,
Please follow this procedure:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/troubl_f.html#wp1049302
This was taken from this other post
https://supportforums.cisco.com/thread/159449
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html
07-09-2013 09:10 PM
Here is the procedure for password recovery
http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/troubl_f.html#wp1049302.
'hw-module module slot-number reset cf:1' does not remove any config, It just reboot FWSM from maintenance partition which is cf:1.
I believe that you can do it on standby module without interrupting the traffic. But I never try it before. So for safety, I suggest to do it during the change window
----------------------------------------------------------------------------------------------------
Lost password go to http://www.recoverlostpassword.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide