FWSM shows NAT from

[Asim Afzal]

Hi,

When i do show xlate   i can  see below nat entries but there is no NAT static or dynamic  configured on FWSM.Can any body advise why i am  getting these entires

SIB-FWSM-A/admin/sec/act#

SIB-FWSM-A/admin/sec/act# sh xlate det | i 10.32.5.31

NAT from admin-dmz5:10.32.5.31 to admin-dmz10:10.32.5.31 flags Ii

NAT from admin-dmz5:10.32.5.31 to OOB-NOC-SOC:10.32.5.31 flags Ii

NAT from admin-dmz5:10.32.5.31 to OOB-MGMT-SERVERS:10.32.5.31 flags Ii

NAT from admin-dmz5:10.32.5.31 to outside:10.32.5.31 flags Ii

Thanks

Asim

[Julio Carvajal]

Hello Asim,

The l is for a No Nat rule. Do you have a NAT 0 rule??

Rate all of the helpful posts!!!

Regards,

Jcarvaja

Follow me on http://laguiadelnetworking.com