Hello,I've tried so many config methods I'm not confused on the issue.I have a DSL modem from Virgin Media and if I plug my laptop into it it gives me a public IP and I can get on the internet, it is doing some sort of DHCP. Now I have put the outsi...
Do i have to use the Management port to configure the CX module, also is there any other way to access the ASA 5515 CX module other than accessing it via managemnt port, i dont want to terminate the management port on to my l2 swithc . But the issue ...
Hello Guys - We are monitoring our client's ASA firewalls (various 7.x versions) using snmp v2 configuration. Our monitoring servers are sitting behind management interface of devices.A new requirement has come up where another company will need to m...
Hi everyone,is there still the same problem with communication between two subinterfaces on same security level? Please see part of configuration below. I have two vlans 40 and 60 on switch. One uplink connected from switch to FW interface ethernet0/...
Hi all, A couple issues came up after installing our new 5510, a couple sites that uses the same ISP as our's had issues, one where we can email them but their incoming to us wasn't working, and another site we couldn't browse on the web. This all wo...
I am in the process of setting up a segrated Guest Wifi network in my office and in doing so realized that I can not access my NAT'd externally facing web servers through this network. This guest network is using 8.8.8.8 for DNS and is properly resol...
Customer has a new ASA5545 and needed to add a new license PAK.They did a show inventory to get the serial number for the device. Unfortunately this is different from the serial number you get from the show version which is what is checked when you ...
Hi,I've got an issue where servers within an internal network connected to the ASA can access the internet (These are Dynamically NAT'd as expected).However, when I try to ping from the ASAs outside interface to the internet, I can't - I also can't e...
In device management via the asdmunder management access rules in context mode on a ASA 5585 with 9.0.3 version (tested with several versions),All the firewall rules are displayed that are managed by TAB firewall, access rules.All rules from of all i...
Hi,I have this query to understand when does the asa actually look into nat factor when traffic is traversing interfaces/security level.Is it tied to the security level or interfaces or both?For the discussion sake, i would just put up the below inte...
Hello. I posted an example of "how have not to be" network topology, and unfurtunately I have this topology... Firstly I have to say that my switches are not manageable and don't support VLANs. So, I have 3 internal networks in the SiteA and one netw...
If we disabled the sqlnet inspection in one firewall context, would this be applied to other contexts too?Thank youDarius.Fariborz@cgi.com
Hi All,Hope you are doing good,Continously I am getting below error log.Dec 07 2013 11:30:02: %ASA-7-710005: UDP request discarded from 10.109.6.1/67 to WTBB:255.255.255.255/68Dec 07 2013 11:24:00: %ASA-7-710005: UDP request discarded from 0.0.0.0/68...
Hi all,I'm having some problems with certs in a failover pair.I've imported a wildcard cert onto the primary node in a failover pair. This cert was then bound to the outside interface. This is working on the primary node fine for clientless SSL VPNs....
What is the new 8.3+ "coding" for the NAT translation below from an 8.2 ASA? I'm running 9.1.2 on a 5512Xstatic (WebTestInside,outside) tcp 172.31.0.14 https 192.168.20.14 https netmask 255.255.255.255 dnsI basically want the translation to be used ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM | ||
| 06-19-2025 07:32 AM | ||
| 06-17-2025 01:07 PM |
| User | Count |
|---|---|
| 10 | |
| 7 | |
| 5 | |
| 2 | |
| 1 |
