Hello Guys
I am upgrading SFR module for ASA5545, I followed the steps and i am now stuck when issuing command "system install ftp://dpe-jackson:Cashius.1@10.125.126.39/asasfr-sys-6.3.0-83.pkg" i get
113
Upgrade aborted.
below are the device details
GP-DPE-FW1#
GP-DPE-FW1# dir
Directory of disk0:/
12 drwx 4096 23:42:38 Feb 12 2018 log
24 drwx 4096 23:42:40 Feb 12 2018 crypto_archive
25 drwx 4096 23:42:44 Feb 12 2018 coredumpinfo
128 -rwx 108822528 23:47:10 Feb 12 2018 asa982-smp-k8.bin
129 -rwx 26970456 23:48:32 Feb 12 2018 asdm-782.bin
130 -rwx 41848832 23:48:58 Feb 12 2018 asasfr-5500x-boot-6.2.2-3.img
131 -rwx 115605504 03:02:52 Jan 23 2019 asa9101-smp-k8.bin
132 -rwx 4213 03:03:00 Jan 23 2019 oldconfig_2019Jan23_0909.cfg
133 -rwx 5363 08:15:34 Feb 13 2019 old_running.cfg
134 -rwx 7423 03:11:28 Feb 19 2019 admin.cfg
138 -rwx 46197839 20:58:44 Jul 17 2019 anyconnect-win-4.7.04056-webdeploy-k9.pkg
139 -rwx 103034880 04:47:10 Jun 22 2020 asa9-12-3-2-smp-k8.bin
140 -rwx 0 05:19:54 Jun 22 2020 FSCK0000.REC
141 drwx 4096 08:11:29 Jun 23 2020 LOCAL-CA-SERVER
142 -rwx 34033084 13:06:08 Jun 21 2020 asdm-7131.bin
143 -rwx 42960896 15:36:14 Jun 21 2020 asasfr-5500x-boot-6.3.0-3.img
144 -rwx 1413072386 15:41:22 Jun 21 2020 asasfr-sys-6.3.0-83.pkg
I cannot ping DG, FTP server when i am connected to session SFR Console but when i am on the ASA i can ping , TFTP. I am wondering if i am missing something
Sensor1-boot>system install ftp://dpe-jackson:Cashius.1@10.125.126.39/asasfr-sys-6.3.0-83.pkg
Verifying...
..
113
Upgrade aborted.
Sensor1-boot>
Sensor1-boot>ping 10.125.124.1
PING 10.125.124.1 (10.125.124.1): 56 data bytes
--- 10.125.124.1 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
Sensor1-boot>
Sensor1-boot>ping 10.125.126.39
PING 10.125.126.39 (10.125.126.39): 56 data bytes
below are steps i followedCopi
1. copy image from TFTP server
copy tftp://10.125.126.39/disk0:asasfr-5500x-boot-6.3.0-3.img disk0:/
2. setup boot image in recovery mode (this will erase all the SFR/IPS settings)
sw-module module sfr recover configure image disk0:asasfr-5500x-boot-6.3.0-3.img
sw-module module sfr recover boot
debug module-boot
3. To setup network settings
session sfr console
setup
4. copy sfr image from tftp to ASA locally
system install ftp://dpe-jackson:Cashius.1@10.125.126.39/asasfr-sys-6.3.0-83.pkg
please assist I a
