h323 video through pix

[a.diot]

hi all,

I'm trying to establisg an h323 video conf through

a pix 515,my remote correspondant can see me but i can't see or ear him.

Do i need a special conf,does this work with nat,pat?

here is a piece of conf

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

global (outside) 1 195.X.X.X

nat (inside) 0 access-list no-nat

nat (inside) 1 128.128.0.0 255.255.0.0 0 0

What should i do in order to permit my remote partner

to initiate the video conf

Thanks in advance

[apriore685]

First question. What type of camera are you using?

Second question. Did you translate a legal address to a private address for that camera?

Third step. Find out what protocols you need to open up for the camera. Ex.(polycom has a range of 15-20 ports that need to be opened for the camera to pass traffic.)

If you are using a polycom camera you can scroll through the menu screen and see the ports that you need to open in the firewall.

Hope this helps. Also make sure that your camera's are up todate with latest software and also your firewall should be 6.3.3. If you do all this and there is still a problem Cisco has another version of the 6.3.3 IOS called 6.3.3_118. I have this running at a customers site and was giving to me from a Tac engineer.