help to site to site vpn wizard

[oscar.moyano]

HI.

I need configure a vpn site to site between 2 cisco routers.

My lan is:

Fastehernet0 (wan) : 213.27.220.214

vlan1: 10.0.0.0/24 router:10.0.0.251

etc...

In wizard(img1.jpg) I don't know where have every type:

for example:

1. Select the interface for this VPN connection: here vlan1 or fastehernet0???

2. Source : vlan1 or fastethernet 0???

3. destination: 10.0.0.0 /255.255.255.0 ???

Help please

[andrew.prince]

Oscar,

I would configure:-

1 = choose FE 0/0

2 = choose VLAN 1

3 = the remote end LAN IP Subnet

HTH

[oscar.moyano]

3= remote lan is 192.168.101.0/24 and router is 192.168.101.254

would configure:

192.168.101.254 255.255.255.255

or

192.168.101.0 255.255.255.0

I have proved the two configurations and tunnes is down

[andrew.prince]

I would configure 192.168.101.0 255.255.255.0 - this means that any traffic "going to" 192.168.101.0/24 "should" be encrypted.