05-06-2015 11:49 AM - edited 03-11-2019 10:53 PM
I have a core switch running EIGRP and it connects to the ASA which also has EIGRP running. How can I setup EIGRP so the Site-to-Site VPN subnets are propagated throughout the EIGRP AS? ASA is running 8.2(5).
Mike
05-06-2015 12:45 PM
Hi Mike
I have never used it but Reverse Route Injection will automatically add static routes for your VPNs and inject them into a dynamic routing protocol for you.
According to this link from ASA 8.x it is also supported for EIGRP -
like I say never used it so can't say for sure how well it works.
if it doesn't work then you could either -
1) add statics to the ASA and manually redistribute into EIGRP
or
2) add statics to your core switch pointing to the ASA for the remote networks
so a number of options and one of them should work at least.
Jon
05-06-2015 01:02 PM
That is where I was going but thought I would check to make sure there was not something I missed. I have used Reverse Route Injection and it does work great.
Now I should not add the subnets in the "Network" statement under EIGRP correct, just redistribute the Static routes?
Thanks Jon, hope things are going good for you. Oh yeah, Go Flames! that is still your team right?
05-06-2015 02:44 PM
Mike
Now I should not add the subnets in the "Network" statement under EIGRP correct, just redistribute the Static routes?
Correct.
Hope your good as well.
Edit - football for me and I think you know who my team are :-)
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide