cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
588
Views
5
Helpful
1
Replies

Hi! Another Question with ASA5516

I have to redundant ISP at ASA5516. But I only have ASA5505 it is pretty difficult to configure with

ASA5505 license....

 

In asdm os ASA5516, I will 0.0.0.0 0.0.0.0 x.x.x.x outside with metric 1 and
0.0.0.0 0.0.0.0 x.x.x.x(backupGW) with metric 100.

They are different network with default static routing.

 

Question 1, Is this work when GW with metric 1 has been shutdown and change automatically to metric 100 GW?

Question 2, I want to know the internet downtime when question 1 is working well.

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

There is a lot of documentation on doing this properly. I recommend you follow this document from Cisco TAC:

 

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118962-configure-asa-00.html

 

There will be a brief outage when the primary route is lost and the ip sla operation result informs the ASA to switch to the backup route.

View solution in original post

1 Reply 1

Marvin Rhoads
Hall of Fame
Hall of Fame

There is a lot of documentation on doing this properly. I recommend you follow this document from Cisco TAC:

 

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118962-configure-asa-00.html

 

There will be a brief outage when the primary route is lost and the ip sla operation result informs the ASA to switch to the backup route.

Review Cisco Networking for a $25 gift card