04-26-2023 05:24 AM
HI,
I need help to change the FP1010 FTD using FDM DHCP lease time ?
Is there is a way to change the lease time for DHCP ?
Thanks
Solved! Go to Solution.
04-26-2023 05:49 AM
@HaniAbuelkhair6735 no, the configuration is applied via the GUI.
The screenshots above are literally all that is required to change the DHCP lease time:
Create a FlexConfigObject - specify the command dhcp lease <value> just change the value of 86400 to the value you require.
Create a FlexconfigPolicy and include the object you created above, then deploy the policy.
04-26-2023 05:36 AM
@HaniAbuelkhair6735 you cannot natively change the DHCP lease time from the GUI. You have to use FlexConfig
04-26-2023 05:44 AM
Thanks @Rob Ingram i am not familiar with Flexconfig is there is a command line that i can use to change the DHCP lease time
04-26-2023 05:49 AM
@HaniAbuelkhair6735 no, the configuration is applied via the GUI.
The screenshots above are literally all that is required to change the DHCP lease time:
Create a FlexConfigObject - specify the command dhcp lease <value> just change the value of 86400 to the value you require.
Create a FlexconfigPolicy and include the object you created above, then deploy the policy.
10-26-2023 07:41 AM
I'm doing above solution at Cisco Firepower 1010 Threat Defense (FTD) using Firepower Device Manager (FDM) but I'm having this error:
Any ideas?
10-26-2023 07:47 AM
@Piotr Kotłowski this works for me on FDM 7.3, you may need to upgrade in order for that command to be supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide