How can i Police all FTP traffic through the ASA to only use 5Mbps

[Andrew Melsom]

Hello All

Need some help configuring policing on the ASA, everything i have tried is failing and is still using 20Mbps of the pipe.

Can someone please give me a walkthrough on how to configue this just for FTP traffic.

Thank you               

[Andrew Melsom]

And i do not know how to verify this as it looks like it is working sometime and sometimes is not.

This graph is all from when the FTP transfer was occuring and not much other traffic.

Traffic is Outbound

And keeps changing

From the output of Show service-policy police it look like it is not droping the traffic ?

      Input police Interface outside:
        cir 5242500 bps, bc 2620 bytes
        conformed 1295 packets, 97385 bytes; actions:  transmit
        exceeded 0 packets, 0 bytes; actions:  drop
        conformed 1480 bps, exceed 0 bps

      Output police Interface outside:

        cir 5242500 bps, bc 2620 bytes

        conformed 383 packets, 30993 bytes; actions:  transmit

        exceeded 0 packets, 0 bytes; actions:  drop

        conformed 0 bps, exceed 0 bps

      Input police Interface comdmz:

        cir 5242500 bps, bc 2620 bytes

        conformed 0 packets, 0 bytes; actions:  transmit

        exceeded 0 packets, 0 bytes; actions:  drop

        conformed 0 bps, exceed 0 bps

      Output police Interface comdmz:

        cir 5242500 bps, bc 2620 bytes

        conformed 22932 packets, 20722318 bytes; actions:  transmit

        exceeded 0 packets, 0 bytes; actions:  drop

        conformed 2344 bps, exceed 0 bps