How can we launch KVM from CIMC Command line

[Jithishkk1514]

Hello All,

We are using appliance SNS-3495 with 2.2.0.470 version patch 15. 

As per the notification pop, Flash player support to end on December 2020 and we are unable to login to CIMC Console for a re-imaging activity.

My query

1. Can we launch KVM from CIMC Console?

2. How we can monitor the RAID information for the appliance in this scenario.?

3. What is the best Cisco can recommend for automation of alert instead of eye ball monitoring of ISE services ?

    (Note : Alarm setting is enabled and throwing false alerts due to bug behavior)

[Marvin Rhoads]

I believe if you update your CIMC using the host update utility (HUU) the KVM should then be accessible using a non-Flash Java-based HTML window.

[Jithishkk1514]

@Marvin Rhoads 

Thank your for response.

Is there any document you could refer for me how to can update the CIMC host update utility (HUU).

[Marvin Rhoads · Accepted solution]

Try this guide:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/cli/config/guide/4_0/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_40/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_40_chapter_01110.html#task_25869FBB5C9D41A597D17912DAF1BCFD