I have a very unusual situation. I have an ASA 5515-x running Cisco Adaptive Security Appliance Software Version 9.1(4)
I have a stuck static route that I cannot remove from the device. I have tried clear configure route BGPDMZ:
cerberus-01(config)# clear configure route BGPDMZ
cerberus-01(config)# exit
cerberus-01# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
S 70.39.130.0 255.255.255.128 [1/0] via 162.222.65.1, BGPDMZ
S 173.205.112.0 255.255.255.128 [1/0] via 162.222.65.1, BGPDMZ
S 192.168.200.0 255.255.255.0 [1/0] via 162.222.65.1, BGPDMZ
C 162.222.64.0 255.255.255.0 is directly connected, Inside64
C 162.222.65.0 255.255.255.224 is directly connected, BGPDMZ
C 162.222.66.0 255.255.255.0 is directly connected, Inside66
D 10.10.10.0 255.255.255.248 [90/28416] via 10.10.11.1, 0:37:56, Intra-colo
C 10.10.11.0 255.255.255.252 is directly connected, Intra-colo
S 192.168.100.0 255.255.255.0 [1/0] via 162.222.65.1, BGPDMZ
cerberus-01#
It lives?
I tried no route....
I tried no route and then D/C power for 5 mins...
This route no longer exists in the conf yet it will not delete from routing table. Can anyone help me or do I need an exorcist?
Steve
