how to clear connection on PIX 535 with OS version 8.0(2)

[andrea malacarne]

Hi,

how can i clear connection on PIX 535 witch OS version 8.0(2)? after upgrading software from 7.x to 8.0(2) it is not possible to use "clear conn" command.

thank you

Andrea

[Jennifer Halim]

"clear conn all" if you would like to clear all connections.

OR/ if you would need to clear specific connection, here is the command reference for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c3.html#wp2140024

Hope that helps.

[rsolaro]

Hi,

unfortunately i can't use "clear conn ...". I can only perform the following commands

pix-sat# clear co?

  console-output    counters

Andrea

[Jennifer Halim]

I just double check the command, and it was only introduced from version 8.0.4 from the 8.0.x train.

From the previous version, it was supported from 7.0.8 and 7.2.4.

You can also use "clear local" alternatively, which will clear all the translations and connections.