02-24-2016 05:50 AM - edited 02-21-2020 05:44 AM
I have CSM 4.10 for managing my Cisco security devices. What do I need to do on ASA IPS module and CSM, so ASA IPS modules will be properly monitored by CSM? (dashboard widgets, event viewer, heath monitoring and rest).
Thank you in advance!
02-24-2016 07:28 PM
There is a wealth of information provided in great detail in the User Guide.
Please refer to it here:
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/410/user/guide/CSMUserGuide/ivman.html#pgfId-511988
02-24-2016 11:49 PM
Thank you Marvin. I already did all of the following from User Guide you provided. However, I still cannot see ASA IPS events and information in IPS related dashboard widgets. Is it necessary to have SNMP communication enabled for this?
02-27-2016 05:37 AM
The transfer from IPS Sensor to CSM is via SDEE protocol.
Since CSM runs on a Windows server, you can easily do a Wireshark packet capture to confirm whether or not the transfer is taking place.
The TAC might be a good resource as looking at it interactively is probably the most effective troubleshooting method.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide