i have a demo SF DC and ASA (sfr) and would like to span live traffic to the DC so i can present it to the upper management and hopefully have it in budget for next year.
My DC is configured, i have ASA added, have licences but not sure how to configure DC/SF in monitor mode. The purpose is to span all production traffic and not to block anything. Would you guys be able to provide some guidances/docs? Thanks
Need to have ASA in transparent mode, one interface (g0/0) connected to spanned port; managemetn interface connected to DC, add sfr sensor to DC, setup access policy to trust all traffic and assign policy to ASA.
Cisco Champion Radio · S7|E37 Business Resiliency for your Workforce and Workplace
Today, organizations are facing changes so large, so fast, and so many—seeing acceleration of already established trends as well as unprecedented disruption—that’s making ...
Hello,i have a N5k-k5548up-af and i have a acl for trusted network which is attached to line vty and to my uplinks interface, and i have around 250 interface vlan and my interface vlans can reach bgp port or snmp port, is there nayway that tune copp to pe...
This event had place on Tuesday 22nd, Septemberat 10hrs PDT
Omar Santos is an active member of the cyber security community, where he leads several industry-wide initiatives and standards bodies. His active role help...
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
There has been a lot of grey area when one needs to get started with ISE or when one does not have any specific background.Could you please guide me to what are the thing that one needs to know inside out and what are the things which require only a minim...