11-21-2015
12:35 AM
- last edited on
03-25-2019
05:57 PM
by
ciscomoderator
How to configure trace route in a cisco firewall for a group of windows users and a group of linux machine
i searched enable ICMP,
but what is the difference in these configure for between window and linux ?
Solved! Go to Solution.
11-21-2015 01:06 AM
hi,
try configuring below and change 'any' with the source/destination and mask.
access-list OUTSIDE extended permit icmp any any time-exceeded
access-list OUTSIDE extended permit icmp any any unreachable
access-group OUTSIDE in interface outside
policy-map global_policy
class inspection_default
inspect icmp error
11-21-2015 01:06 AM
hi,
try configuring below and change 'any' with the source/destination and mask.
access-list OUTSIDE extended permit icmp any any time-exceeded
access-list OUTSIDE extended permit icmp any any unreachable
access-group OUTSIDE in interface outside
policy-map global_policy
class inspection_default
inspect icmp error
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide