cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
46264
Views
20
Helpful
2
Replies
Highlighted
Beginner

How to enable Cisco Anyconnect VPN through Remote Desktop

Hi,

When users are trying to get connected to VPN from Remote machines. They are getting below Err. Some one could help me in fixing this issue by command line.

"VPN Establishment capability from a Remote Desktop is disabled. A VPN Connection will not be established"

Thanks 

Sachin M

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Sachin,

Hi Sachin,

By default, only local users may connect via any connect client. You would need to edit the anyconnect client profile. Please change the  WindowsVPNEstablishment parameter to "AllowRemoteUsers" instead of "LocalUsersOnly.

Please refer the below document for more information.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac13vpnxmlref.html#wp1070852

Regards,

Jagrati

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Hi Sachin,

Hi Sachin,

By default, only local users may connect via any connect client. You would need to edit the anyconnect client profile. Please change the  WindowsVPNEstablishment parameter to "AllowRemoteUsers" instead of "LocalUsersOnly.

Please refer the below document for more information.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac13vpnxmlref.html#wp1070852

Regards,

Jagrati

View solution in original post

Highlighted
Beginner

Re: Hi Sachin,

Hi Jagraaga,

By default, only local users may connect via any connect client. You would need to edit the anyconnect client profile. Please change the WindowsVPNEstablishment parameter to "AllowRemoteUsers" instead of "LocalUsersOnly.

After Changed to "AllowRemoteUsers" what I have to do? Please assist me as soon as possible.

Thanks & Regards,

Likith Pallela