How to generate a ping from FMC GUI or CLI

[network1215]

Folks, 

I am trying to initiate a ping from my FMC Cli but I do not see Ping command available in CLISH mode..

All I see

>

Configure

Exit

Show

System

When type system.

Sytem>  

It will give other options but No Ping, 

configure

exit

expert

generate-troubleshoot

lockdown

I am puzzled just to initiate a simple ping process.. ? expert mode takes me shell where it says 

ping icmp open socket: operation not permitted.

Can anyone help ?

[Rob Ingram · Accepted solution]

@network1215 

You can use "sudo" in front of the command (i.e., sudo ping ......), when running from expert mode, to elevate the permissions when runnning the command.

[Marvin Rhoads · Accepted solution]

Or just switch to full-on root / superuser mode with "sudo su -".

Cisco Fire Linux OS v6.7.0 (build 51)
Cisco Firepower Management Center for VMWare v6.7.0.1 (build 13)

> expert
adm-marvin@fmc:~$ sudo su -
Password: 
root@fmc:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=117 time=5.57 ms
64 bytes from 8.8.8.8: icmp_req=2 ttl=117 time=5.40 ms
64 bytes from 8.8.8.8: icmp_req=3 ttl=117 time=5.36 ms
^C
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 5.369/5.448/5.570/0.087 ms
root@fmc:~#

[network1215]

Thank you gents