How to monitor threat detection on ASAv

[jewfcb001]

Hi All ,

I would like to know how to monitor threat detection on ASAv . I found some information from link below . I see the command "show threat-detection rate" but I'm not sure this information can show via snmp or oid for detect or not ? And Can show this 

information on 3rdParty monitoring tool ?

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113685-asa-threat-detection.html

https://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/show_asp_drop/show_asp_drop.html

[jewfcb001]

Hi All 

Can you help me ?

[Mohammed al Baqari]

Hi,

You can monitor your threat detection feature using syslogs. Here is a good
technote on what syslogs will be generated for different thresholds. You
can configure your SIEM to alert accordingly.

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113685-asa-threat-detection.html

**** please remember to rate useful posts