How to setup up RADIUS Server in Windows NT to use with PIX 515 Firewall ?

[l_alagappan]

have installed Internet Authentication Server (IAS) in Windows NT 4.0 and configured the RADIUS server with PIX Firewall IP Address ( OS 6.22) ). Now, in the User Profile, there is no attributes selected. Also, RADIUS Server is not logging the user name, pwd, ip add, etc. But Remote user logging via RAS Server is authenticated thru RADIUS Server. What are the Cisco Attribute Types and Values to be used with IAS? IIS Version is 4.0 under Windows NT 4.0

[tepatel]

Here is the url which has a link for configuring IAS with cisco's PIX

http://www.cisco.com/warp/public/110/cvpn3k_pix_ias.html

and

http://www.microsoft.com/windows2000/en/server/help/default.asp?url=/windows2000/en/server/help/sag_ias_checklist_corp.htm

Also you will find lots of sample config for PIX with AAA at following url

http://www.cisco.com/warp/public/707/index.shtml#pix

[l_alagappan]

The web sites mentioned refer only to Windows 2000 whereas I need help for Windows NT 4.0. Hv already installed IAS in Windows NT 4.0 but it is not logging the user authentication. Any help pl?