05-25-2004 12:49 AM - edited 02-20-2020 11:25 PM
I've got a new PIX 515E and I would like to know how I can do the connection to my PC by the console and with the serial port.
And after it will be connected, how to backup configuration from an other PIX 515E to run this configuration in my new PIX 515E.
Thanks a lot !
05-25-2004 03:32 AM
you need a rj45 to serial adapter, and a blue cisco rollover cable (pins 1 thru 8 flipped to 8 to 1).
you can back up the existing config to a tftp server, and download one from there
didn't the 515e come with any documentation?
05-25-2004 03:40 AM
Thomas,
You should have all the instructions for your PIX on the CD that is provided, if not follow the instructions from here:
The above is a quick start guide for the PIX 515/6.3.
Jay
05-25-2004 06:11 AM
Thanks a lot !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide