Hp Openview NNM installed on DMZ of a PIX 515E

[dzahira123]

I've installed the Hp Openview NNM on the DMZ of a PIX 515E in order to supervise my inside,DMZ and outside network. But, I did'nt manage to access to the inside network since I can't ping the inside machines from the DMZ.

Of course, I can ping the inside translated address but the system says that the inside machine are not in the topology.

I would be thankful if you could help me.

Urgent please.

thanks

[wong34539]

Since DMZ is in a lower security zone than the inside interface by default it will not be able to access the nside network. You would need to configure and apply the neccesary access lists for this happen. For further details refer,

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/config/mngacl.htm#wp1001972.