04-17-2014 02:59 AM - edited 02-21-2020 05:09 AM
i have done below config on the ASA side
access-list wccp-server extended permit ip host 172.16.1.100 any
1 2 3
access-list wccp-traffic line 1 extended deny ip host 172.16.8.100 any access-list wccp-traffic line 2 extended permit tcp ip 172.16.1.0 255.255.255.0 any eq www
1 2
wccp web-cache redirect-list wccp-traffic group-list wccp-server wccp interface production web-cache redirect in
04-18-2014 10:54 AM
You may have this document by now. But it comes handy for this configuration:
https://supportforums.cisco.com/document/48341/asa-wccp-step-step-configuration
I reviewed the configuration and it looks fine. The only thing is that on the access list you have to specify the protocol as IP or TCP not both.
access-list wccp-traffic line 2 extended permit tcp ip 172.16.1.0 255.255.255.0 any eq www
Do you have any other question?
05-06-2014 04:09 AM
thanks for your reply
i will try and get back to you
thanks and appreciate your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide