07-29-2009 12:13 PM - edited 03-11-2019 09:00 AM
i am getting the following error in my syslogs:
regular translation creation failed for icmp src inside:x.x.x.x dst outside:x.x.x.x (type 3, code 3)
although everything appears to be working fine. any thoughts?
08-04-2009 03:07 PM
This message can be either an internal error or an error in the configuration.
%PIX-3-305006: Regular translation creation failed for protocol src int_name:IP_addr/port dst int_name:IP_addr/port
A protocol (UDP, TCP, or ICMP) failed to create a translation through the PIX Firewall. This message appears as a fix to caveat CSCdr0063 that requested that PIX Firewall not allow packets destined to network or broadcast addresses. PIX Firewall provides this checking for addresses that are explicitly identified with static command statements. With the change, for inbound traffic, PIX Firewall denies translations for a destined IP address identified as a network or broadcast address.
08-04-2009 03:20 PM
do u have translation defined from traffic from inside to outside ,
nat (inside) 1 0 0
glo (outside) 1 interface
08-05-2009 03:44 AM
absolutely.
nat (inside) 1 10.0.0.0 255.0.0.0
global (outside) 1 interface
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide