Interfaces flapping in IDSM modules

[Adrian Caba Gutierrez]

Hello,

I have two 6500 switches in VSS each with a IDSM module, I only made the upgrade of signatures and after that the data-port interfaces are flapping. There is only configuration for the management port in the switch and the basic configuration in the IDSM.

I attach the output of show version commands and some logs.

Thanks.

[Luis Silva Benavides]

Hi Adrian,

Could you please upgrade your IDSM to 7.0.8? We have seen many issues with pre-7.0.8 and the latest signatures.

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html