cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1583
Views
0
Helpful
1
Replies
Highlighted
Explorer

IP SLA *and* ASA 5505 Active/Standby Failover

A client has two ISPs and two ASA's.  They want to use FAST ISP most of the time and NOTSOFAST ISP

is FAST ISP fails for some reason.  I found a great configuiration doument using the IP SLA which I have

used in the past in IOS.  I have setup ASA active/standby failover on ASA 5505s in the past.  My question which

I am not seeing directly addresses in my google searches is: Can these two redundancy features play nicely together?

Is there a document describing such?  Thank you!

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/failover.html

1 REPLY 1
Highlighted
Cisco Employee

I can't see a reason why the 2 features won't work together. The 2 features will work just fine with each other.

Unfortunately there is no sample config with both feature in the same document, but it will work just fine.

Content for Community-Ad