cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1072
Views
15
Helpful
6
Replies

IP Source Guard

muos
Level 1
Level 1

I'm trying to enable IP Source Guard on an old ws-c2960-24tt-l iso 15.0(2)SE4

In EXEC mode 

int f0/x

I've tried both commands both error at verify, sadly... Any pointer?

ip verify source

    ^

ip verify source port-security

    ^

1 Accepted Solution

Accepted Solutions

Yes they help with protecting against IP address spoofing as they create a database of IP to MAC associations.  IP Source Guard also uses these tables for its mapping.

--
Please remember to select a correct answer and rate helpful posts

View solution in original post

6 Replies 6

balaji.bandi
Hall of Fame
Hall of Fame

post output :

show version

show License

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

if the command not accept then this feature is not work in this platform.

muos
Level 1
Level 1

Thank you for your responses. Trying to learn Cisco and would like to mitigate IP address spoofing. What other configuration do you suggest, given that IP Source Guard is unavailable to me?

I would appreciate any advice you can give me.

If this command is not available then you are most likely either missing the security license or running LAN LITE image.  Verify which IOS image you are using on the switch and the license features installed.

You could also look into DHCP snooping and ARP inspection.

--
Please remember to select a correct answer and rate helpful posts

Marius, I'm using a packet tracer, so not sure how the license works. I've enabled DHCP snooping, and ARP inspection does that act as protection for IP address spooning as well? 

Yes they help with protecting against IP address spoofing as they create a database of IP to MAC associations.  IP Source Guard also uses these tables for its mapping.

--
Please remember to select a correct answer and rate helpful posts
Review Cisco Networking for a $25 gift card