cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
605
Views
0
Helpful
2
Replies

IPS backup config from CSM

Hello,

I am using the CSM 4.0.1 to manage several IPS (AIP-SSM-20 and 40 and IPS 4260).

The configuration archive is nice to have the latest conf for my IPS device, however they are in a XML format!

But I need the config file format the same way it is generated by the IPS when I upload the current config from my IPS to a FTP or SCP server

i.e. in this format:

! ------------------------------
! Current configuration last modified Thu Nov 25 10:18:52 2010
! ------------------------------
! Version 7.0(4)
! Host:                                        
!     Realm Keys          key1.0               
! Signature Definition:                        
!     Signature Update    S528.0   2010-11-03  
! ------------------------------
service interface
physical-interfaces GigabitEthernet2/0
no description
admin-state enabled
duplex auto
speed auto
default-vlan 0
alt-tcp-reset-interface none
exit
physical-interfaces GigabitEthernet2/1
no description
admin-state enabled
duplex auto
speed auto
default-vlan 0
alt-tcp-reset-interface none
exit
exit

.....

Is there a way from the CSM to get this file from my IPS?

Thanks!

2 Replies 2

Scott Fringer
Cisco Employee
Cisco Employee

At this time, CSM works strictly with the XML-wrapped configuration files from the sensor.

Scott

Thanks for your answer Scott.

I'll wait patiently until the CSM provides this feature

Review Cisco Networking for a $25 gift card