07-07-2016 11:59 AM - edited 03-12-2019 01:00 AM
Hi everyone,
I want to implement IPS in my network design .i have ASA 5545 on 30 different sites .Can anyone please suggest me solution for that .Do i go for FirePower software or hardware or any other option ?
Thanks in advance
07-08-2016 05:45 AM
Do you need an IPS just for perimeter or in the internal network?
Does every site need an IPS?
How much traffic does it need to process?
07-11-2016 10:39 AM
Hi Marcel ,
Actually its client requirement that they need IPS module for every single location .
Traffic is very less but its requirement .
Its kind of perimeter .
issue for mr is they want to manage all these IPS from 2 locations simultaneously.Can i do that with firepower ?
If i calculate total number of IPS its more than 30 .
07-12-2016 12:05 AM
With the Firepower Management Center you can manage all these IPS with one GUI. I don't know if you can add the devices to two management centers and how they behave then.
07-12-2016 08:22 AM
Thanks Marcel
07-12-2016 09:08 AM
You will need the hardware appliance version of FirePOWER Management Center. Something like the FS2000 or larger, depending on your traffic levels and total number of users.
http://www.cisco.com/c/en/us/products/collateral/security/firesight-management-center/datasheet-c78-732251.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide