IPSec Site-to-Site vpn configuration help..

[shubgwal]

Hi All , 

I am facing issue in pinging PC0 to PC1. 

[shubgwal]

i have attached the scenario of S2S vpn between R1 and R2 .
Their is no static route on ISP router for both the subnets on the other end .

[Seb Rupik]

Hi there,

Have you attempted to configure R1 and R2? What problems are you seeing.

If you haven't completed the IPSec configuration, then there are plenty of guides online. This would achieve what you need:

https://www.cisco.com/c/en/us/support/docs/routers/1700-series-modular-access-routers/71462-rtr-l2l-ipsec-split.html

cheers,

Seb.

[Dennis Mink]

Can you give us a bit more info like crypto maps, and a sh cry isakmp sa  and sh cry ipsec sa, and debugs so we can see why its failing, also tell us source and destination.  

cheers