cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
943
Views
5
Helpful
1
Replies

ISE Local Test Bed problems

JustinLute
Level 1
Level 1

I am attempting to create a virtual machine from the ISE Local Test Bed (ISE 2.4 ISO Image) which I downloaded from https://developer.cisco.com/docs/pxgrid/#!downloads/ise-local-test-bed.

 

I downloaded the ISO, and all indications are that I have a good copy of it. However, VMware Fusion will not recognize it as a bootable system.

 

Am I simply misunderstanding the purpose of this particular ISO? Any tips? Thanks.

 

(This is a duplicate of https://community.cisco.com/t5/services-discussions/ise-local-test-bed-problems/m-p/3850800 which I originally created in the wrong location.)

1 Accepted Solution

Accepted Solutions

JustinLute
Level 1
Level 1

I found the problem. I had configured the virtual machine to use UEFI instead of BIOS. After enabling BIOS, the ISO is bootable.

View solution in original post

1 Reply 1