01-09-2011 09:28 PM - edited 03-11-2019 12:32 PM
Hi there,
I'm trying to configure the FWSM to limit the number of tcp connections per user. I can only find a configuration which limits the entire ip subnet. Is there a similar command or a way to mimick the command on the ASA, "set connection per-client-max"
thanks,
joe
Solved! Go to Solution.
01-10-2011 04:27 PM
Thanks Joe.
Please kindly mark the post as answered and rate useful post if you have no further quesions. Thank you.
PS: No, not related to Yennie Halim (might be my very very distant cousin )
01-09-2011 09:40 PM
Hi Joe,
Unfortunately "set connection per-client-max" nor ""set connection per-client-embryonic-max" commands are not supported on FWSM.
Here is the command reference for verison 4.1 FWSM for your reference on "set connection" command:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm41/command/reference/s1.html#wp2734935
Message was edited by: Jennifer Halim
01-10-2011 04:23 PM
Hi Jennifer,
Thanks! BTW I've always been meaning to ask you if you are related or know
of Yennie Halim?
Cheers,
joe
On 10/01/11 4:40 PM, "halijenn"
01-10-2011 04:27 PM
Thanks Joe.
Please kindly mark the post as answered and rate useful post if you have no further quesions. Thank you.
PS: No, not related to Yennie Halim (might be my very very distant cousin )
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide