Hello All,
We are installing an infra-considering log collector server and analyzers for one of our customer's DC and DR locations. The scenario is Customer is going to push/inject logs from their side on UTM_3200 FW to our end Dell_S4128T-ON L3 switches(172.22.1.100/102_24). The Log collector server (172.22.1.5/29) and analyzers server (172.22.2.21/29) are connected to the other end of Dell_S4128T-ON switches (consider like Servers---L3 SW---UTM FW). These UTM FWs will inject all types of logs within their infra towards Servers via Dell L3 Switch. These servers are required to communicate with each other at regular intervals.
Now, we are trying the Inter-VLAN communication scenario for a solution. however, it is not working. Let me elaborate on what we are trying. We are keeping one of the log-collected server in VLAN 10 and other log analyzer in VLAN 20. We have configured Interface VLAN 10 & 20 and given IP adds to both. We tried making the server connected interface of the switch as Trunk and allowed all VLANs over it, NOT working. We tried keeping them in access VLAN mode, NOT working. We did gave both servers Gateway, that is configured on the switch (as its loopback 1_172.22.1.100/101/24).
Also, we are getting "IP address clash with other interface" type error while giving IP add to interface VLAN and switch interfaces (while trying to make those interfaces L3). We also tried referring to below discussions and attached files.
https://community.cisco.com/t5/switching/pbr-and-inter-vlan-routing/td-p/1474607
https://www.dell.com/support/kbdoc/en-in/000120976/how-to-perform-policy-based-routing-pbr-on-dell-networking-n-series-switches
I would request you to please let me know on how to figure out the solution.
