Logging Informational Configuration in Cisco ASA

[AshSe]

I have configured below logging informational commands in my ASA but I am still not able to receive information logs from the firewall:

logging enable
logging timestamp rfc5424
logging standby
logging monitor informational
logging trap notifications
logging device-id hostname
logging host management (ip address of Syslog Server> <protocol/port#>

Would like to know, if I am missing any important logging ...... informational command/s.
logging class auth trap informational

[ccieexpert · Accepted solution]

for logging to syslog you have to use "logging trap <level"> not logging monitor..

Please take a look at this sample

https://www.packetswitch.co.uk/cisco-asa-syslog-simplified/

[AshSe]

Thanks @ccieexpert 

logging trap informational 

worked

[MHM Cisco World]

MHM